The Sleep Zone Air Purifier

Removing airborne allergens from your daily life is impossible. But removing them from your sleep zone is guaranteed with This Sleep Zone Air Purifier.

This Air Purifier quietly passes fresh air over your bed using four pre-filters and a HEPA filter rated to capture up to 99.97% of particles larger than 0.3 microns, including dust, pollen, pet allergens, and mold, ensuring the air in your sleep zone is free from impurities.

Using the higher fan speed during the day, the over-bed laminar extension arm may be replaced with an included vent cap for whole-room use. The upright conduit fits easily between your bed and nightstand. Includes one HEPA filter and four pre-filters. Plugs into AC. 38" L x 18" H x 17" D. (38 lbs.). No other residential air system delivers "clean room" quality air right to where it truly makes a difference in your sleep quality!

Features of Pure Air Sleep System Air Purifier:

* Advanced Filtration Technology: HEPA filtration is combined with laminar air disbursement to removed 99% of all airborne allergens greater then 0.3 microns including dust mite particles, pet dander and pollens and replace them with pure air in just 12 seconds.

* Quiet: This unit has been called “whisper quiet” and generates less than 45 decibels of sound. The unit is designed to fit under the bed which muffles the hum from the already quiet fan speeds – low and high. The unit moves air at 15’ per minute.

* Concentrated Air Flow: Unpurified air is drawn into the under the bed unit and passes through the pre-filter and HEPA filter and the purified air travels through the arm tubes of the unit delivering a concentrated source 99% purified air through the overhead arm. Creates a purified sleep zone in just 12 seconds.

* Under-Bed-Unit: The air purifier unit slides discretely under the bed so it does not stand out or take up space in your bedroom. The unit measures 7” H x 16” W x 25” L, so it requires at least 7” of under bed clearance. If you have a low profile bed frame and do not have 7” of clearance the unit can be stood on its side and placed between head of bed and the wall.

* Adjustable Tower Height: The tower of the unit can be adjusted in height to fit with the height of your bed frame. This feature allows you to achieve the desired placement of the overhead air outflow arm.

* Tower Cap: The unit comes with a tower cap that slides onto the top of the tower (if you decide to remove the airflow arm) for daytime use as a decorative, protective cover for the tower.

* Air Changes: Experts typically recommend 6-8 air changes per hour. The Pure Air Sleep System delivers an unprecedented 1200 air changes per hour in ones sleep zone.

* Easy to Use: Control fan speed (high or low) by touching the top of the small controller. Can be placed on a night stand and controlled by hand or placed on the ground and used as a foot control.

* LED Indicators: 2 LED lights are located on the controller. One light is the Fan Speed Indicator which glows dim green for low speed and bright green for high speed. The other LED light is Filter Change Indicator. It will flash amber when it is time to change the pre-filter and will flash red when it is time to change the HEPA filter

* Minimal Maintenance: HEPA filter should last one year under normal use. The Filter Change indicator will flash red when it is time to change HEPA filter. The pre-filter should be changed every three months. The unit comes standard with 1 HEPA filter and 4 pre-filters for a year worth of filtration.

* Energy Efficient: The system is very energy efficient and can be operated for less then $0.02 per night (@ $0.10/kwh).

[ Product Page ( $349 ) VIA 7Gadgets ]